HPswitch - Revision history

Aleks: /* Basic commands */

2023-12-05T16:18:12Z

Basic commands

← Older revision		Revision as of 17:18, 5 December 2023
Line 55:		Line 55:
	show rate-limit icmp [<port>] #--- Show ICMP rate limit on all or selected ports		show rate-limit icmp [<port>] #--- Show ICMP rate limit on all or selected ports
	show snmpv3 <group\|user> #--- Show SNMPv3 groups or users		show snmpv3 <group\|user> #--- Show SNMPv3 groups or users
			</syntaxhighlight>Vlans<syntaxhighlight lang="bash" line="1">
			vlan <vlan ID> name <vlan name> #--- Create VLAN and set its ID and name
			no vlan <port> #--- Remove vlan setting on port
			vlan <vlan ID> <tagged\|untagged> <port> #--- Set port as tagged on vlan
			show vlan #--- Show information about VLAN on this swtich
			show vlan ports <port> #--- Show VLAN ID and status of specific port
			show vlan <VLAN ID> #--- Show ports on this VLAN and port status
	</syntaxhighlight>		</syntaxhighlight>

Aleks: /* Basic commands */

2023-12-05T16:17:01Z

Basic commands

@@ Line 1: / Line 1: @@
 ==Basic commands==
-<syntaxhighlight lang="bash" line>#show config --- Show config file
+Config<syntaxhighlight lang="bash" line="">show config #--- Show config file
-#show running config --- Show running config file
+show running config #--- Show running config file
-#copy config config1 usb <file name> --- Copy active config file to USB drive
+copy config config1 usb <file name> #--- Copy active config file to USB drive
-#copy config config1 tftp <IP> <file name> --- Copy your config to file to TFTP server.
+copy config config1 tftp <IP> <file name> #--- Copy your config to file to TFTP server.
-#copy tftp config <fileneme> <IP> ---Copy your config from TFTP server to switch
+copy tftp config <fileneme> <IP> #---Copy your config from TFTP server to switch
-#show flash --- Displays info about flash (version etc.) -#copy tftp flash <IP> <file name> <primary|secondary> --- Download and update your flash with from TFTP server
+show flash --- Displays info about flash (version etc.) -#copy tftp flash <IP> <file name> <primary|secondary> #--- Download and update your flash with from TFTP server
-#copy flash usb <file name> <primary|secondary> --- Copy flash to USB drive
+copy flash usb <file name> <primary|secondary> #--- Copy flash to USB drive
-#copy flash tftp <IP> <file name> <primary|secondary> --- Copy flash to TFTP server
+copy flash tftp <IP> <file name> <primary|secondary> #--- Copy flash to TFTP server
-#write memory --- Save config</syntaxhighlight>
+write memory #--- Save config</syntaxhighlight>handy<syntaxhighlight lang="bash" line="1">
 == View MAC Address tables ==

Aleks at 16:12, 5 December 2023

2023-12-05T16:12:25Z

← Older revision		Revision as of 17:12, 5 December 2023
Line 1:		Line 1:
			==Basic commands==
			<syntaxhighlight lang="bash" line>#show config --- Show config file
			#show running config --- Show running config file
			#copy config config1 usb <file name> --- Copy active config file to USB drive
			#copy config config1 tftp <IP> <file name> --- Copy your config to file to TFTP server.
			#copy tftp config <fileneme> <IP> ---Copy your config from TFTP server to switch
			#show flash --- Displays info about flash (version etc.) -#copy tftp flash <IP> <file name> <primary\|secondary> --- Download and update your flash with from TFTP server
			#copy flash usb <file name> <primary\|secondary> --- Copy flash to USB drive
			#copy flash tftp <IP> <file name> <primary\|secondary> --- Copy flash to TFTP server
			#write memory --- Save config</syntaxhighlight>

	== View MAC Address tables ==		== View MAC Address tables ==
	~~'''~~Listing all learned MAC addresses on the switch, with the port number on which each MAC address was learned~~'''~~<syntaxhighlight lang="bash">		Listing all learned MAC addresses on the switch, with the port number on which each MAC address was learned<syntaxhighlight lang="bash">
	show mac-address		show mac-address
	</syntaxhighlight>~~'''~~Listing all learned MAC addresses on one or more ports, with their corresponding port numbers~~'''~~		</syntaxhighlight>Listing all learned MAC addresses on one or more ports, with their corresponding port numbers

	For example, to list the learned MAC address on ports A1 through A4 and port A6:<syntaxhighlight lang="bash">		For example, to list the learned MAC address on ports A1 through A4 and port A6:<syntaxhighlight lang="bash">
	show mac-address a1-a4,a6		show mac-address a1-a4,a6
	</syntaxhighlight>~~'''~~Listing all learned MAC addresses on a VLAN, with their port numbers~~'''~~		</syntaxhighlight>Listing all learned MAC addresses on a VLAN, with their port numbers

	This command lists the MAC addresses associated with the ports for a given VLAN. For example:<syntaxhighlight lang="bash">		This command lists the MAC addresses associated with the ports for a given VLAN. For example:<syntaxhighlight lang="bash">
	show mac-address vlan 100		show mac-address vlan 100
	</syntaxhighlight>		</syntaxhighlight>

Aleks: Created page with "== View MAC Address tables == '''Listing all learned MAC addresses on the switch, with the port number on which each MAC address was learned''' show mac-address '''Listing all learned MAC addresses on one or more ports, with their corresponding port numbers''' For example, to list the learned MAC address on ports A1 through A4 and port A6: show mac-address a1-a4,a6 '''Listing a..."

2023-12-05T16:10:16Z

Created page with "== View MAC Address tables == '''Listing all learned MAC addresses on the switch, with the port number on which each MAC address was learned'''<syntaxhighlight lang="bash"> show mac-address </syntaxhighlight>'''Listing all learned MAC addresses on one or more ports, with their corresponding port numbers''' For example, to list the learned MAC address on ports A1 through A4 and port A6:<syntaxhighlight lang="bash"> show mac-address a1-a4,a6 </syntaxhighlight>'''Listing a..."

New page

== View MAC Address tables ==
'''Listing all learned MAC addresses on the switch, with the port number on which each MAC address was learned'''<syntaxhighlight lang="bash">
show mac-address
</syntaxhighlight>'''Listing all learned MAC addresses on one or more ports, with their corresponding port numbers'''

For example, to list the learned MAC address on ports A1 through A4 and port A6:<syntaxhighlight lang="bash">
show mac-address a1-a4,a6
</syntaxhighlight>'''Listing all learned MAC addresses on a VLAN, with their port numbers'''

This command lists the MAC addresses associated with the ports for a given VLAN. For example:<syntaxhighlight lang="bash">
show mac-address vlan 100
</syntaxhighlight>