Networkinterface

From Piszczynski
Revision as of 11:40, 25 August 2022 by piszczynski>Aleks (→‎Enable Ping / ICMP using netsh)

Network Interface Issues NIC

Check DHCP settings + assigned IP address Check Cables

Check for incorrectly uninstalled network adapters in device manager > show hidden devices then uninstall

Reset the TCP/IP stack with the following command: "netsh IP reset" (will clear all network configuration)

If the issue is with NIC teaming this can be removed for all adapters with the command: "LbfoAdmin /Resetconfig"


Enable Ping / ICMP using netsh

IPv4

  • netsh advfirewall firewall add rule name="ICMP Allow incoming V4 echo request" protocol="icmpv4:8,any" dir=in action=allow

IPv6

  • netsh advfirewall firewall add rule name="ICMP Allow incoming V6 echo request" protocol="icmpv6:8,any" dir=in action=allow