piszczynski>Aleks |
|||
Line 9: | Line 9: | ||
Install-WindowsFeature -name Telnet-Client | Install-WindowsFeature -name Telnet-Client | ||
Then use command telnet <IP address or hostname> <portnumber> | |||
If the window opens to a blank window it means the port is open |
Revision as of 18:08, 6 September 2019
Using Telnet to test open ports
You will need to enable Telnet in CMD
dism /online /enable-feature /featurename:telnetclient
Or use this in powershell
Install-WindowsFeature -name Telnet-Client
Then use command telnet <IP address or hostname> <portnumber>
If the window opens to a blank window it means the port is open